Red Hot Silvia

The Nissan 200SX, or more popularly known as the Nissan Silvia, has gotten a bit of a surge in popularity over the past few years. The emergence of drifting, as well as the anime Initial D, has made the 200SX a legend. Here in the Philippines, 2nd hand units are commanding high prices despite the car being around 10 years old. Being a 2 door coupe and seeing as how Nissan Philippines only imported a limited number of units, making a Silvia stand out from the crowd should not be too difficult of a proposition.

The S14 Silvia you see here is the result of meticulous attention to detail. Starting life as a completely stock green unit, the car has transformed to a red hot coupe that is bound to turn heads. Since most units imported by Nissan were equipped with an Automatic Transmission, the first order of the day for this Silvia was a Manual Transmission conversion. With that taken care of, careful attention was paid to extracting the most power out of the already potent SR20DET. A Turbonetics T04E turbine is matched to a Greddy 24R Intercooler and Greddy E-manage to force feed the engine. A Sard fuel regulator and Sard 550cc high flow injectors take care of the fueling needs. Finally, a full 3-inch exhaust system with titanium Espelir muffler finishes off the engine work, yielding an astonishing 308 horsepower and 298 lb-ft of torque at the wheels.

Power is nothing without control, but in the case of the Silvia, people usually want to lose a bit of control by drifting. Tein Type HE Drift Spec Coilovers were installed on all four corners to better instigate oversteer. Tein, Nismo, and Greddy bars and braces add to the stiffness of the chassis. A Brembo brake system from a R34 Nissan Skyline GTR was installed at the front and coupled with Endless brake pads to ensure that if the going gets too tough, the brakes will always bite.

Arguably, the thing that sets this Silvia apart from most is the exterior. A full M Sports widebody kit including front and rear bumpers, front and rear oversized fenders contribute to the hulking stance of the car. M Sports carbon fiber front canards and diffuser adds to front downforce while a Sard carbon fiber GT Wing adds downforce to the rear. Finishing touches include M Sports carbon fiber hood and C-West GT style carbon fiber mirrors. A bright shade of red was painted over the car by the professionals from Alex Car Restoration. Finally, a set of rare and wide 18 x 9.5 Volk Racing CE28N wheels were mounted on the front while an even wider pair of 18 x 10.5 were mounted on the rear.

The interior is kept simple but all parts installed are of the highest quality. BRIDE ZETA II seats ensure that the driver and passenger are kept snuggly in place during wild oversteering maneuvers. A Nismo JTC Steering wheel and Nismo GT shift knob is utilized while Sard gauges ensure timely monitoring of engine vitals.

With a Silvia that looks and performs like this car, it’s no wonder that Nissan’s sports coupe is as popular as ever.

StreakZ of Yellow

When the Nissan 350Z was first introduced in 2002, it quickly became an instant hit. The combination of its striking good looks, adequate 3.5 liter V6 engine, and very competent chassis drew praises from the automotive world. With the demise of the inline six engines due to emissions, tuners also found a new market with the V6 engine of the 350Z.

This particular 350Z is a special 35th Anniversary Edition that Nissan built to commemorate the 35th Anniversary of the debut of the Datsun 240Z. It has a slightly more powerful engine than normal Z’s, with other changes mostly with aesthetics.

The owner of this yellow example certainly wasted no time in upgrading an already potent car. On the engine side, a Blitz exhaust manifold is partnered with an Espelir JGT500 exhaust system to produce a sound that rumbles at idle, but screams up top. Additional modifications to the VQ35 engine include Skunk 2 high rise plenum spacer, HKS oil cooler, ARC Titanium Radiator Cooling Plate, as well as a custom titanium airbox built by the people at Autoplus Sportzentrium in Mandaluyong.

The 350Z already has very good handling as attested to by different publications. But to make this Z handle even better, a set of Tein Type Flex coilovers was added. Since the car already came with Brembo brakes, only a set of Project Mu brake pads were added to make stopping distances a little bit shorter.

With an already gorgeous car, some aesthetic modifications were added including Mine’s Carbon Fiber front lip, Mine’s carbon fiber air inlet, Nismo carbon fiber B pillar garnish, as well as a menacing Esprit carbon fiber rear wing.

With the Z’s already wide stock body and RWD platform, nothing less but the biggest and lightest wheels will do. In this regard, a set of staggered 19 inch Volk Racing TE37 wheels were used; they measure 8.5 inches up front and 9.5 at the back. These are paired with 265/35R19 Bridgestone Potenza S-03 Front Tires and 285/30R19 Bridgestone Potenza S-03 Rear Tires.

On the street, the car rides like a dream. The suspension is firm but very compliant even in rough roads. It is on the track that this machine really stands out. Body roll is kept to a minimum while the torque of the engine ensures adequate power going out of corners, even in low rpms.

Drift Toy

Once regarded as an executive’s car, the Nissan Cefiro was a popular car in the early nineties when it was released. But now, the car is seen in a different light or in drift terms as a different approach angle. The once reserved and serious car is now being used as a project car for drifting because of its long wheelbase and rear wheel drive configuration.

Also in a different light is Atoy Llave of A-toy Bodykits who is more often known for his wild bodykit creations and extreme aesthetic modifications who is now into the performance scene as well. Being bitten by the drifting bug recently after he joined one of the drift clinics organized by the DMF Drift School, Llave has built his own drift car from a Nissan Cefiro.

However, a plain looking Cefiro would not be enough for him, so a custom widebody FRP aerodynamic bodykit and ground effects were added to the car to put the A-toy trademark on the car, while carbon-fiber aero mirrors and a carbon-fiber rear wing adds some contrast. Custom graphics made by Winner Graphics were also added to further enhance the car’s drift car appeal. The look is finished off with white ROTA P45Rs wrapped with Avon ZZ3 tires.

Under the hood is an RB25DET engine transplanted from a Nissan Skyline R32 GT-S. The intercooler from the R32 was also used and custom intake and exhaust pipes were done by Fremuff. Some additional parts are an HKS Super Mega Flow filter, Blitz blow-off valve and an Apex-i AFC Neo for instrumentation and minor fuel delivery tuning.

In the roadholding section, suspension is handled by a set of TEIN Type HA coilovers and a custom built rollcage. To further stiffen the chassis, it was also seam-welded by DMF. The brakes from the R32 were also transplanted to compensate for the engine’s extra power.

This is one mean car inside and out, and goes sideways. What more could you ask for?